|
Subwoofer Audiovector C-SubMade of branded stuff NRFB (Non Resonant Fiber Board) is based on a dual-layer body vibration isolator - padded washers two plates are connected to the bottom three screws through the polymeric sleeve. Do subwoofer Audiovector C-Sub besides terminals of all types (except LFE) and standard adjustments, are 15-decibel EQ (Boost) and the scheme of "soft clipping" in the amplifier. Phase continuously adjustable, there automute. Amplifier Class D (keys MOSFET) nominal 300 watt powered large toroidal trance. All outputs signal corrected HPF: 90 Hz (-3 dB, 12 dB/octave line out and 6 dB - at high amplitude). Provided for as many as six finishes. Brown curve shows the effect of the function Boost (maximum) - this duplication gain control. The upper cutoff frequency of the LPF does not change substantially. Subwoofer good manifests itself in 2.1 system. When adherence comfortable volume at minimum cutoff frequency at once, but fails to achieve the necessary proportions with shelf acoustics. Formed very timely upper bass to support a wide range of musical styles. For classics, however, need more delicacy in the middle register. As for theater applications, then it is possible to freely operate the volume and even bandwidth. Then sub confident, powerful boomed without overloading even at high mode Boost - for most that militants. Audiovector C-Sub can provide a service to living in a small apartment with musical theater-goer needs exclusive extremism. ![]() |