Subwoofer Energy S10.3

Subwoofer representing Canadian brand Energy, equipped with 250-mm speaker (located on the front wall of the design). 38 mm voice coil controls cone membrane complex composite material: combined polypropylene, fiberglass, ceramics, and mica. Notable suspension driver: a very wide rubber semicircle seen frequent transverse reinforcement thickening (technology Ribbed Elliptical Surround). Woofer is loaded at two ports FI (at the bottom). Specified by offset range cone is impressive - 40 mm. As energy resource models: the nominal 200 W maximum power of 800 watts.

LPF organizes recession upper range at 18 dB/oct. Most organs are grouped on a convex panel behind the device. There are inputs for high-amplitude signals and linear. Separate switch sets the last track: bypassing the crossover (LFE) or through it. To undoubted benefits the consumer front volume control placed on top. See it just below the logo Energy - part-time indicator.

Total control over the sound situation - the credo of this machine. The device produces a fairly deep, dense well-shaped, movable bass. Body sound is perfectly decorated in different parts of the range - from the extreme bottom to the interface between a band satellites. Only on volume of more than 3/4 of the maximum sound structures in the lower bass begin to flake slightly: the sound is perceived not contaminated, in a generalized sense of tone. LF-rides in the movie succeed S10.3 excellent. Where necessary, the subwoofer will break that is urine: considerably leaning forward, like a sling diffuser produces a hefty bass kernel space. Model Energy S10.3 excellent music plays in the ensemble with a pair of bookshelf in the room is medium sized. Only a very picky ear does not detect assembled, dense and slightly dryish sound "Canadian" special acoustic charm.