Subwoofer reviews

Subwoofer AAD S-160

High Oval AAD S-160 shows all kind of kinship with the acoustics, a series of component S. graceful form conceals considerable dimensions of low-frequency instrument, promising serious bass. Indirect sign of power can serve as a large heat sink (caution with sharp fins!). Curved sidewalls recruited from...
Subwoofer AAD SD-10

Subwoofer SD-10 is available in three finishes (black, cherry and maple) and looks very solid thanks to the clever design with decorative elements front panel. It also installed a 10-inch head, protected by a metal mesh. Driver diffuser made from natural fiber-reinforced damping composition. Couple...
Subwoofer Acoustic Energy 108

The model Acoustic Energy 108 can be attributed to the category of compact subwoofers designed for relatively small space. A sealed enclosure is a regular cube with sides of 28 cm, based on elegant metal cones. Installed on the bottom edge 200-mm head with a cone of pressed pulp attached to the wide...
Subwoofer Acoustic Energy Aegis Evo Sub

Aegis Evo - a veteran, is released more than seven years ago and still sells well. The front panel mounted 10-inch head with combined cone (cone is made of cellulose, and the central dome of the polymer) and stiffer suspension. Unlike the vast majority of models in this price range it uses a closed acoustic...
Subwoofer ASW Sonus SW 250

German woofer SW 250 series of Sonus - definitely original woofer. First of all, attention is drawn to his unconventional proportions, very favorable in terms of solving the problem of interior. Framing 250 SW judge. There are line inputs and outputs, there is a "crossover" input (feed a signal to bypass...
Subwoofer Audica CS-SUB8

Like other speakers this company, this model differs space design - on the matte black cube with gently rounded edges and no hint of any seams and joints. 200 mm speaker with a concave dust cap is on the bottom wall. The whole design is based on the plastic spikes. Adjustment on the rear panel. High-amplitude...
Subwoofer Audio Pro B1.39

Active acoustics Audio Pro unimaginable without proprietary system ACE-Bass. Recall, ACE-Bass - a proprietary system for monitoring parameters of the low frequency driver with the help of feedback amplifier. Thanks to the best proportions B1.39 seems compact and even elegant. The front panel is closed...
Subwoofer Audio Pro B2.27

The number after the point in the alphanumeric combination B2.27 is useful volume clearance in liters. Calling chic homage to the piano lacquer requires regular care surfaces. Bare hands painted surfaces better not touch, the set includes the benefit of special white gloves. Two speakers included electrically...
Subwoofer Audio Pro Mondial S.3

Get the speaker system low bass is quite simple - you need to take a 18-inch speaker and put it in the body size of a refrigerator. And make a professional stage acoustics, but for home systems, this method is not always appropriate. With the advent of home theater subwoofers have become huge demand,...
Subwoofer AudioSource SW Four

AudioSource says it designed the SW Four powered subwoofer to be compatible with a wide variety of loudspeakers, and consequently it is equipped with a full complement of adjustments. Physically, however, it is an almost featureless black box meant to be placed on the floor in (usually) an inconspicuous...
Subwoofer Audiovector C-Sub

Made of branded stuff NRFB (Non Resonant Fiber Board) is based on a dual-layer body vibration isolator - padded washers two plates are connected to the bottom three screws through the polymeric sleeve. Do subwoofer Audiovector C-Sub besides terminals of all types (except LFE) and standard adjustments,...
Subwoofer Audiovector K-Sub

Audiovector K-sub is equipped with 250mm driver. The diffusor of the speaker is made of carbon-mineral composite. Quite wide suspension of the speaker calls your attention - looks like it is made to lengthen the trajectory of diaphragm's shift. The head is activated by the amp of D class, powered by...
Subwoofer B&W AS1

The model AS1 by B&W differs by high and narrow body. The controls are placed on the upper wall for convenience and sunk in a rectangular niche. At the front the bass-reflex immediately catches the eye. The surface of the socket end reminds the surface of the golf ball that helps to make air flow more...
Subwoofer B&W AS2

AS2 is one of the sixteen (!) low-frequency loudspeakers, which are presented in the catalog of the famous English company. A 250mm driver with the diaphragm, made with addition of mica, is obliged to operate successfully in the harshest energetic modes. The speaker radiates forward; protective mesh...
Subwoofer B&W ASW 300

ASW 300 is one of nine branded subwoofers. The developers recommend it for low-frequency support of acoustics from the DM300 series. The diffusor of the speaker is made of Kevlar-paper composite. The branded low-noise bass reflex port is at the bottom of the body. A necessary for its efficient operation...
Subwoofer B&W ASW 600

On the idea of marketing the company, the subwoofer is optimized to work in the theater of the speakers series DM600 (S2, S3) and for smaller rooms. For forty-liter closed box design - the expected limit. Head at ASW 600 is more, but also no external signs of Kevlar additives. Finish - light oak "sorrento",...
Subwoofer B&W ASW500

B&W systems often surprises in the form of non-standard technical solutions. And here is ASW500, the sub, which has no bandwidth control. Instead of it the developers offer to smoothly remove excess deep bass from the signal for the main stereo pair with a help of first order filter. Corrected signal...
Subwoofer B&W ASW608

ASW608 is the most compact among the models of the 600 series. Of almost cubic form body looks attractive. The device has the closed loading and designed for the rooms of medium sizes. The head is of own design, with 200mm diffusor made of cellulose, Kevlar fibers and specially developed polymer. The...
Subwoofer Boston Acoustics ASW 250

Despite of low price, ASW 250 looks incredibly presentable. A high qualitative vinyl was used in finish and side glossy trims are made of wear-resistant plastic. The construction is bass reflex with lower position of airy port. A 10-inch (25 cm) head with a diffusor made of polymer which contains particles...
Subwoofer Boston Acoustics MSub

Construction Boston Acoustics MSub largely original - it uses a non-trivial design with a pair of passive radiators. The main active driver 10-inch gauge is located on the front panel and auxiliary, 203-millimeter - on the side walls of the housing. Diffusers heads made of lightweight polypropylene and...
Subwoofer Boston Acoustics PV-400

Series of American PowerVent Boston Acoustics consists of four subwoofers, PV-400 - the cheapest, but not the smallest. High and rather narrow MDF enclosure contains a 65-watt amplifier and a seven-inch speaker. The head is secured to the partition wall inside the housing and turned on to the neck of...
Subwoofer Boston Acoustics PV-500

Sub Boston Acoustics PV-500 looks very elegant. The front panel volume control only stylish. 250 mm speaker system blows down and big round reflex port onto the back wall. In low-head DCD-applied technology, providing more travel diffuser. Basstrac scheme avoids distortion when overloading, while the...
Subwoofer Boston Acoustics PV-600

A new series of powered subwoofers from Boston Acoustics PowerVent consists of four compact low-frequency systems with extraordinary powerful built-in amplifiers. All emitting economy nice 300-watt PV-600 is located on the bottom: sensitive, with a light membrane woofer and steam bass reflex ports. Proprietary...
Subwoofer Boston Acoustics PV-700

305-mm head subwoofer placed on the bottom wall, and bass reflex port - back on top. Speaker produced by proprietary technology DCD, allow to increase the membrane and the power stroke. With such an arrangement has not been without legs, giving the output wave emitter. Manages the speaker 200-watt amplifier. ...
Subwoofer Boston Acoustics XB6

In the line of active subwoofers Boston Acoustics XB four models, and "six" holds the second place from the top. It's pretty heavy unit with a 12-inch head ported design. Finishing option that you see in the photo - "black ash", but there is still cherry, ie matte black. Horizontal edges almost cubic...
Subwoofer Cabasse Pluton II

Pluton II has narrowband design type. The housing consists of two chambers communicating with the external environment through a "coaxial" reflex port. In large diameter pipes (resonator at the camera) is inserted pipe thinner - resonator far (greater volume) camera. Speaker mounted on the partition...
Subwoofer Canton AS 125

A 310-mm woofer with aluminum diffuser is located in the upper part of the front panel of CantonAS 125 sub. Under the speaker there is a large mouth of bass-reflex. Nominal power of the amp is not high (200W), but the stated frequency range is impressive: 20-200 Hz. Volume, cutoff frequency of the crossover's...
Subwoofer Canton AS 22

AS 22 is a relatively small but very heavy subwoofer, which is installed on little legs, providing the desired isolation from vibrations. The body's walls are made of MDF. The speaker and bass-reflex port are located on the faceplate, being closed by metal grill - a useful thing if there is a potential...
Subwoofer Canton AS 40

A big 310-mm speaker and located from below on the same vertical axis with it large bass-reflex port look promising. SC (Soft Clipping) scheme works in the amplification path of AS 40, which discharging the speaker from low bass allows reducing the level of nonlinearity. A magnetic shielding of the...
Subwoofer Canton AS 50

Active Subwoofer 50 is well-equipped and the most powerful among low-frequency Canton devices. There are linear and high-amplitude inputs/outputs (RCA are closed by plugs), controls of band, level and signal phase on the service panel. The terminals are shorted by pairs - LCF is missing everywhere. The...
Subwoofer Canton Ergo AS 650 SC

Ergo line of German company Canton made for quite some time and was largely determined by the quality standards for its price range. The latest incarnation of this popular series includes a full range of speakers to build any sound system - from stereo to multi-channel. We now see whether it supports...
Subwoofer Canton Ergo Sub 650

The construction Canton Ergo Sub 650 is based firm laid emitter 310 mm, equipped with lightweight and durable aluminum alloy cone. Ported subwoofer works in design, with the bell air port displayed on the floor (which improves the impact at the bottom of the operating band). Built-in amplifier has sufficient,...
Subwoofer Canton Sub 10

A perfectly manufactured subwoofer is made in strict style typical for almost all the company's products. A 260-mm driver with pressurized diffuser made of aluminum alloy is hidden behind the removable metallic grill, which closes a significant part of the front panel. It has a specially designed profile...
Subwoofer Canton Sub 12

In the model's name the manufacturer gives to understand that the subwoofer is equipped with 12-inch head. And in fact, an active driver with aluminum diffuser with the diameter of 310 mm carries the most of load. A passive membrane of the same caliber helps it and such design has all the advantages...
Subwoofer Castle Cube

Lined with elegant wood veneer Castle Cube - a perfect cube, if we neglect the height removable plastic supports. They create an air gap required for the full functioning of the "bottom" reflex port. Speaker mounted on the front and secured with eight screws already. In a ten drivers double magnet system...
Subwoofer Celestion S80

S80 is an elegant active Celestion subwoofer, which replaced S8. A rigid body is made of MDF. A heavy sub is installed on cone-type legs. The speaker with eight-inch diffuser made of especially finished cellulose and a pair of bass-reflex ports are located at the bottom. The system has wide functional...
Subwoofer Cerwin-Vega! LW-10x

LW-10x is the smallest subwoofer of the LW series. The weight of subwoofer is huge - there is a powerful transformer inside; the magnetic system of the speaker makes a serious contribution too. Being a proportionally lessen copy of LW-12 and LW-15 the "ten" has the equipment very similar to the equipment...
Subwoofer Cerwin-Vega! LW-12x

What do you need in order to build a good subwoofer? Mainly, a good speaker. It is better to have a good one in order to simplify the task of reducing linear interference. There is no sense to save on the volume of design and make its walls super strict... An active low-frequency system of Cerwin-Vega...
Subwoofer Cerwin-Vega! LW-15x

LW15x is half times more volume than LW-12x, and the huge driver is already fully "occupied" the faceplate of subwoofer. The weight is almost thirty three kilograms! In comparison with LW-12x the larger representative has additional useful functions: particularly subwoofer input with attenuator is provided...
Subwoofer Cerwin-Vega! VE-28S

Unusual proportions of this American subwoofer due to the use of two bass heads. Branded twin 8-inch cone drivers are equipped with red propylene hangers - a distinctive feature of all products Cerwin-Vega. They also have a powerful cast baskets and solid magnetic system that allowed us to obtain high...
Subwoofer DALI Concept Sub

The only in Concept series active subwoofer is prepared in accordance with the original recipe of the company. The basis is a 12-inch head with the diffuser made of cellulose, impregnated with damping compound, which works in the closed acoustic design. The body is compact for such a large driver and...
Subwoofer DALI Fazon SUB 1

The most interesting offer in the segment of mini-subs - the Danish DALI. Fazon SUB 1 is inexpensive, but not primitive trim. Is in the form of glossy black cube with slightly rounded edges and endowed with soft rubber feet. Acoustic design of a "closed box", which set a 17-centimeter-long-stroke head...
Subwoofer DALI Ikon Sub

A medium-sized body of DALI Ikon subwoofer is put on the podium. The port of bass-reflex is on the bottom and "blows" to podium. 305-mm woofer with a paper diffuser is installed on the front panel. The power of built-in amplifier is 250 W. There is only all you need in control and switching. RCA input,...
Subwoofer DALI Suite S1.2

Much design DALI Suite S1.2 goes back to the classical principles of constructing subwoofers. Housing with a strictly rectangular faces respectable size, very decent weight, registration closed type (brand, incidentally, is not a typical loudspeaker DALI); stand - to harmonize proportions... Attention...
Subwoofer DALI SWA-8

Placed on the facade a 200-mm woofer in the design of "the closed body" radiates with a paper cone. There is a shielded dual magnetic system in the motor of the driver. A four-layer copper wire spooling is made on the sound coil with the diameter of 50 mm and the length of 24 mm for support of linear...
Subwoofer DCM TB1515

DCM TB1515 subwoofer has 380-mm woofer with impregnated paper diffuser and the same passive radiator. They are installed on the front and lower wall. The power of built-in amplifier is 250W. The frequency of input signal is limited by HF-filter on 25Hz. And crossover allows to set cutoff frequency in...
Subwoofer DLS T-SUB8

By design, this subwoofer is more reminiscent of a stylish silver cabinet. The speaker cone has a diameter of 200 mm, and it is located on the bottom wall of the apparatus. Near the speaker is narrow reflex port, in the shape of a triangle. Outputs are absent, but there is a mode direct, disables the...
Subwoofer Dynaudio Sub 250

One of the most affordable models in stock Dynaudio closed-acoustic design and 250-millimeter head their own production. The diffuser is made of composite MSP (Magnesium-Silicate Polymer) - a material patented by Danish engineers. Declared rated power amplifier 200 watts peak manufacturer does not report. To...
Subwoofer Dynaudio Sub 250 MC

This compact subwoofer is classified as multimedia and is primarily designed to work together with active acoustics MC 15. Despite its small size, the device is rather massive (affects its quality damping). Thus it could be put into a 24-centimeter-head, the lower boundary of the playback ensured at...
Subwoofer Dynaudio Sub 600

The company allocates its Dynaudio subwoofers in a separate group, not by comparing them with specific series acoustics. Surprisingly, the kid Dynaudio Sub 600 is the top model of the Danish acoustic studio. Is such a compact device can make organic duet with very serious speakers of the older lines...
Subwoofer Elac Sub 101 ESP

Sub 101 ESP is an active subwoofer from the 100th series of German ELAC systems. Mounted in the bottom driver radiates into floor, a necessary gap is formed due to plastic legs. The bass-reflex port is placed on the front panel. The signal goes on linear inputs after the correction by high pass filter:...
Subwoofer ELAC SUB 111.2 ESP

A fairly large rectangular body made of MDF is decorated with matte black wood veneer and is installed on massive rubber supports. The facade is fully closed by a fabric grill on magnetic latches with a big hole in the lower part for large bass reflex port. Dynamic head with aluminum diffuser on rubber...
Subwoofer Elac Sub 2030

The basis of Elac Sub 2030 is the closed acoustic design, which is the most optimal from the point of sound quality. A 10-inch head with the branded design, emitting down, is mounted in a hard case with internal ribs. Among its features I should note a solid basket with the abundance of vent holes and...
Subwoofer Elac SUB 50 ESP

ELAC looks neat and tidy, does not spoil the impression of even a horn reflex port on the front panel. Bottom - placed 270 mm speaker with a concave dust cap and a hard suspension. All control and switching onto the back panel. Only one line input, but high-amplitude signal, the unit may receive directly...
Subwoofer Eltax Atomic A-10.2

Subwoofer enclosure classically root with rounded upper and lower edges. Very minimalist front (panel only reflex port and logo), bottom model dazzles inscriptions appearing on the dust cap 250 mm speaker with a hard suspension. The whole design is based on the rectangular plastic feet with rubber pads....
Subwoofer Energy e-XL-S8.2

S.82 is more like a medium-sized bookshelf speaker than the subwoofer - obviously, its proportions conceal considerable useful body volume. System can be operated in the "on the side". To reduce interference turbulent reflex port specially profiled. Amplifier output stage MOSFET-transistors provides...
Subwoofer Energy Encore 8

Stylish Encore 8, perfectly proved themselves in the composition of the same name set theater acoustics from the Canadian Energy, now stands as a separate combat units. With minimum dimensions of energy he does not hold: MOSFET-transistors in the output stage of the amplifier allow for a peak power of...
Subwoofer Energy ESW-M6

ESW-M6 can be classified as ultra. This regular cube with edge 20 cm weighs about five pounds, because of what at first seems a nice toy. However, it fit as many as three emitter: 6.5-inch active membrane of anodized aluminum on the company's elliptical suspension and a pair of passive radiators of the...
Subwoofer Energy ESW-M8

Subwoofers of ESW series were presented by the Canadian company Energy in 2008 and turned out to be so good by combination of price, sizes and features that analog models were produced in Klipsch Group and under other brands (Energy ESW-M6, Jamo Sub 800, Klipsch SW-110, SW-112, SW-308, SW-310, SW-311,...
Subwoofer Energy S10.3

Subwoofer representing Canadian brand Energy, equipped with 250-mm speaker (located on the front wall of the design). 38 mm voice coil controls cone membrane complex composite material: combined polypropylene, fiberglass, ceramics, and mica. Notable suspension driver: a very wide rubber semicircle seen...
Subwoofer Energy V-SW10

This refers to the subwoofer top models included in the Energy and famous series Veritas. His appearance meets the latest trends - the case is covered with black piano lacquer and is based on the original form legs. Woofer 10-inch caliber has frontal location and loaded onto a phase inverter pair of...
Subwoofer Epos ELS Sub

Elac ELS subwoofer is made in the closed acoustic design. The body is made of 25-mm MDF, separated into two parts (working volume of the woofer and the compartment for amplifier) and carefully reinforced by struts; the front wall has a double thickness. Highly efficient amplifier develops a continuous...
Subwoofer Focal Cub 3

A compact Cub 3 sub belongs to the theatrical Focal line and is designed for combined work with the branded satellites. Externally the device is almost a perfect cube, resting on small legs. A large flare of the bass-reflex is on the front wall and low-frequency head is directed to the floor. The driver's...
Subwoofer Focal Profile SW 908

Profile Series occupies a middle position in the nomenclature of the French acoustic studio Focal, second only to the ultimatum rulers Utopia and Electra. Included in her model are ideal for picking upscale home theater - there is not only floorstanding, bookshelf, center and surround speakers in the...
Subwoofer Focal-JMlab Chorus Sub 300 P

The cabinet is made up of massive panels MDF, thickness in certain places reaches 25 mm. To combat resonances sidewalls made nonparallel, in addition to that on each of them has a powerful anti-vibration pad. Dynamic head, found on the front panel has a rather impressive diameter (27 cm). In this proprietary...
Subwoofer Focal-JMLab Chorus SW 700 V

The French Chorus SW 700 sub attracts you not only by unusual appearance (the design is developed by the famous Pineau & Le Porcher bureau), but also solid construction. To minimize side-tones the body is cut out of MDF plates with the thickness of 25 mm and carefully plugged from the inside. The dynamical...
Subwoofer Focal-JMLab Chorus SW 800 V

Focal active subwoofer reflects the company's branded concept, combining an elegant style and advanced technical solutions. Big by volume body contained 11-inch driver with the diffuser, made by own Polyglass technology. It is loaded on the bass-reflex, directed to the floor. Massive foundation, which...
Subwoofer Focal-JMlab Chorus SW700S

Looks very elegant silver sunny SW700S (finish option - style), representing a series of Chorus S. On the facade of a protective and decorative mask - 270 mm cone driver with manufactured according to the latest version of the proprietary technology Polyglass: on the surface of the cellulose membrane...
Subwoofer Gale 3080W

Almost everything in the design of 3080W inspires confidence - a big massive subwoofer, which has something to show. A good ten inch head rests by back side of cellulose diffuser upon almost 40 liters of useful volume (minus space occupied by the amplifier). Passport nominal power of amplifier is quite...
Subwoofer Heco Astron 12A

Subwoofer series of special acoustics German HECO. Judging by the abundance of theater in its range of accessories (center channel speakers, rear speakers), ruler largely intended for the construction of home theaters. Astron 12A - the second in the lineup and the most powerful subwoofer. Record amount...
Subwoofer HECO Music Style 25A

German subwoofer is massive and has a respectable size. By design, this conventional bass-reflex system, wherein the bass head located on the bottom plane of the housing. It radiates into the space between this plane and the base plate, thereby achieving additional equalization on LF. Diffuser 10-inch...
Subwoofer Heco Phalanx Sub 12A

Subwoofer line Phalanx currently contains two models, Sub 12A - the eldest of them. Studying design, evaluating quality exterior finishes (natural veneer), you know that paying a lot of money, in this case you get the real thing. In accordance with the original concept of PENTA, one of the side walls...
Subwoofer Heco Signature 30

A distinctive feature of the German production is incommensurate developers attention to quality acoustic design speakers. Subwoofers, of course, no exception. Body rigidity small but massive Signature 30 seems too high even for a purely low-frequency system, but the stock does not pull pocket (will...
Subwoofer Heco Slam 12 A

The speaker's caliber is 300 mm and any man's fist easily goes through two bass-reflex ports. Linear input, high-amplitude inputs and outputs are provided for switching. Judging by the results of measurements, some of bass is cut at the outputs for satellites - below 75 Hz. The sub effectively radiates...
Subwoofer Infinity BETA SW12

The catalog features seven Infinity subwoofers (in a series of SW - two). On the facade of Infinity BETA SW12 305-mm see the handsome driver with a conical diaphragm, based on the proprietary CMMD (Ceramic Metall Matrix Diafragme). Very useful for consumers developed Infinity sound system speaker adaptation...
Subwoofer Infinity Cascade 12

An unusual shape of Infinity Cascade 12 subwoofer pleases the eye by the curved top panel smoothly changing into the frontal. The woofer with 250-mm diffuser made of metallic matrix (MMD) is installed at the bottom of the sub and two passive radiators with the same diffusers are installed on side walls....
Subwoofer Infinity Kappa Subwoofer

Smoothed designer veneered panel, rear - under the skin. Under the guise of a non-removable diffuser ceramic-aluminum composite CMMD. Kappa Sub is equipped with all the standard features and in addition a tunable notch filter (20-80 Hz, depth up to 14 dB) system Room Adaptive Bass Optimization System....
Subwoofer Jamo A3SUB.1

Silver A3 Sub.1 from Aesthetic series of Danish company is attracted by perfect simplicity of the form (almost a cube) and elaborate minimalist design of the faceplate. You can immediately feel the style. Driver with polymer diffusor and bass reflex port are placed on the bottom panel. There are graphs...
Subwoofer Jamo D4 SUB

2-head enclosed subwoofer D4 Sub belongs to lineups Dedicated - the highest in the hierarchy JAMO. Beautiful "wooden" side of the subwoofer - excellent quality vinyl. Top Panel - double-layer sandwich: within 18-mm plate MDF, outside - polymer layer ABS, in the end - 36 mm ... We take into account a...
Subwoofer Jamo E6 Sub

Jamo subwoofer demonstrates the branded approach of the Danish company, expressed by the motto "Let's get personal". E6 Sub is clearly designed for that category of listeners, which can let the appearance of sullen bulky box in the apartment only in the nightmare. With the body's volume of 55 liters...
Subwoofer Jamo E7 Sub

E7 Sub is designed to work with the speakers "E" series. 254-mm woofer with paper diaphragm, very wide suspension and double magnet system works in the design of "closed case". It seems that the Jamo E7 Sub - perfect cube (on this point and dimensions), but the body wall slightly (2°) slope. This,...
Subwoofer Jamo Sub 210

The famous Danish manufacturer is presented in our test by inexpensive subwoofer with 8-inch head and built-in amplifier with peak power up to 200 W. The driver works in a bass-reflex acoustic design and radiates into the floor, thereby the level of sound pressure is increasing. Input connectors are...
Subwoofer Jamo Sub 250

The body of Jamo Sub 250 has quite unusual design. U-shaped "cap" is made of MDF and the bottom, frontal and back walls are from plastic. A 200-mm long stroke speaker is attached to lower wall. The slot of bass-reflex is formed by upper and back walls and directed to the back. Peak power of BASH amplifier...
Subwoofer Jamo Sub 650

In inexpensive subwoofers Danish engineers borrowed some solutions the more expensive series. For example, Jamo Sub 650 boasts a 12-inch head, which allows to obtain a lower bound of 24 Hz. With the amplifier, this model is also okay - it pulsed power amp BASH power of 650 watts. Recall that such a scheme...
Subwoofer Jamo Sub 800

"Eight" presents in the name of this sub, but the head's caliber is 6.5 inches (17 cm) and by external signs it is similar to Cambridge Audio MINX X200. It has the same dynamics-"saucers" made of aluminum and elastic suspensions, the same tri-way system of heads' location and "passive radiator", lacquered...
Subwoofer Jamo X5 Sub

Representative of the Danish Jamo - X5 Sub - woofer traditional construction. Steam vented ports on the rear panel supports activities impressive dynamics, whose silvery frame is somewhat reminiscent of a space suit visor. Top cover plastic crowns "light" with LED. Switching to high-amplitude output...
Subwoofer JBL LS120P

Before us is a top model in the nomenclature of the manufacturer. Sidewall impressive body JBL LS120P made of polished wood, plush dark red hue. Facade is completely closed removable grill cloth on a plastic mesh cage. 12-inch speaker with a diffuser of corporate material PolyPlas mounted on the front...
Subwoofer JBL LX 2000

By design, the subwoofer is perfectly consistent with the acoustics series LX. Ten-speaker cone classic pulp is specially designed for LX 2000. According to his passport, a Class D amplifier delivers 150 watts at rated speed at 0.5% THD. There is a complete set of high-amplitude terminal pair of line...
Subwoofer JBL SP150

The company JBL keeps the branded handwriting even in the budget models that for a subwoofer means an American prowess, muscularity and the scale of sounding. JBL SP-150 has a volumetric, rectangular body made of solid MDF, covered with black matte wood grain film. The edges in its upper part are rounded...
Subwoofer KEF C4

The appearance of KEF C4 sbuwoofer is moderately conservative, only frontal slotted bass-reflex outlooks on the body with classical sizes. Low-frequency driver here is of 8 inches (200 mm), the amplifier is also not the most powerful, but 200 W for usual living room will be enough. The body is assembled...
Subwoofer KEF HTB2SE-W

Complicated name means that the subwoofer is designed to work in the branded satellite systems, and "W" indicates the possibility of its wireless connection to the receiver. The model is unusual arrangement housing which is made of aluminum alloy and is shaped like a flying saucer. It is curious that...
Subwoofer KEF Kube-1

You can buy a small active KEF Kube-1 sub separately and as well as a part of several design sets of speaker systems, for work of which it is designed. The sub has an acoustic design with passive emitter, allowing you to get deeper bass with minimal sizes of the body. For this the developers used an...
Subwoofer KEF Kube-2

Kube-2 looks more like self-sufficient device from the series of LF-modules than a compact subwoofer from a complete set of a surround speaker system. On the other hand, it can be purchased separately and used with both speaker system of KEF and any other brand. The body with the volume of 23 liters...
Subwoofer KEF PSW 1000.2

Neat cube KEF PSW 1000.2 is installed on sharp plastic spikes. A 200-mm speaker with a stiff suspension is located on the bottom wall. The chink of bass-reflex is formed by front and bottom wall and is also directed down. The power of built-in amplifier is 100W. The device allows changing the steepness...
Subwoofer KEF PSW1000

PSW1000 - the youngest in the original five low-frequency systems with multiple thousands of indices in the name. 210-mm driver is installed on the bottom panel and radiates to the floor, there is a pair of vented ports. Subwoofer is perfectly equipped. Available - full set of terminals (both high-and...
Subwoofer KEF PSW2500

Closed oval (ellipse in the horizontal section) woofer PSW2500 is part of 5.1 sets KHT5005 and KHT9000. Look subwoofer accompanies streamlined design firm satellites, but this should not be an unambiguous reference - the style is quite adequate for many contemporary approaches to the design of interiors....
Subwoofer KEF PSW3500

It is known that the ideal form for speaker system is sphere. It is completely devoid of standing waves and dispersion is close to perfect. The engineers of KEF took this into consideration while designing PSW3500 sub, the form of which quite meets the requirements of modern design. In the end, it is...
Subwoofer KEF R400b

Subwoofer KEF R400b is, so to speak, a half of LF-section of Blade acoustics. Two absolutely identical emitters, the baskets of which are rigidly interconnected, are mounted in completely closed 22-litre body. Working in-phase and radiating in opposite directions, they create identical spurious vibrations,...
Subwoofer KEF XQ60

Subwoofer is battling the spot even before listening - rarely in the design of one product can be found like the combination of fundamental and elegance. Luxury Oval Office is fully trimmed in black piano lacquer. As the only 12-inch dynamic head emits the floor, and as the acoustic design selected enclosed,...
Subwoofer M&K SB12

Painted "cube" called SB12 belongs to the latest M-series, which is also present in his younger brother SB8, respectively, wherein the smaller volume and more modest caliber drivers. Traditionally this manufacturer in SB12 uses a closed acoustic design and proprietary driver - a 12-inch (300 mm) SuperFast...
Subwoofer M&K SB8

Size this sub is comparable to a bookshelf compact monitor what there are certain advantages - small housing easier to give the necessary strength and rigidity. However, it weighs 8-inch guns very well. Structurally, the subwoofer is a "closed box", which employs proprietary long-excursion driver (Super...
Subwoofer M&K Sound MX 250

In more detail acquaintance found that internal space subwoofer actually divided into two parts - the lower recess is one of a 12-inch dynamic heads whose radiation is directed into the upper chamber, which, in turn, is mounted to the second speaker similarly sized radiating outwardly. Thus both the...
Subwoofer M&K Sound SB12 HP

In older models of subwoofers, related to Series MX, the company MK Sound traditionally applies a push-pull dynamic with two heads working in a closed box. In devices more affordable line of SB, which belongs to the MK Sound SB12HP, one transmitter works, but at the same time remain faithful to the enclosure....
Subwoofer M&K Sound V76

V76 - not the smallest subwoofer from an extensive range of Miller&Kreisel, having rich experience of professional cinema equipment. Enclosed, big paper membrane, respectable size and weight - simple and promising features. The legacy of the professional speaker level control has a strict decibel scale....
Subwoofer Magnat Alpha 20A

Alpha series contains three subwoofers (Alpha 20A, Alpha 25A, Alpha 30A) of similar construction (they differ by the sizes and power of built-in amplifier). Alpha 20A is the smallest LF-system. The bass-reflex port is placed on the faceplate, the speaker with a light paper membrane is fixed at the bottom;...
Subwoofer Magnat Alpha 25A

Model 25A - one of the four subwoofers branded line Alpha. With less its representative - Alpha 20A - already familiar with. Phones are very similar, but the "twenty-fifth" larger and more powerful than 15 watts. Speaker radiates into the floor; port resonator helps him in the front section. Faceplate...
Subwoofer Magnat Beta 25A

The first thing that sets it apart from the mass of similar devices - the location of the dynamic head on the bottom plane of the body, although in our time such a decision has already ceased to be exotic. All representatives of the Beta series have a similar structure, but different dimensions and the...
Subwoofer Magnat Betasub 20A

The legs, overhanding the side walls on the half of their diameter, refresh quite an ordinary body of Magnat Betasub 20 A. Large socket of the bass reflex is located on the front wall. A 200-mm speaker with a soft suspension is directed downwards. A 70W amplifier is able to deliver 140 watts in peak...
Subwoofer Magnat Omega 20A

Magnat Omega 20A is equipped with 210-mm own-produced emitter located on the lower edge of the body, next to which there is Airflex bass-reflex port. For having a greater impact the sound wave is directed into powerful base (which is also divider) made of 30mm MDF plate. Electronic part of the sub is...
Subwoofer Magnat Omega 250 LTD

In the photo you can see the subwoofer in a chic finishing "Rosewood", but this model is also available in white or black piano lacquer. In Case very original design. The main part consists of massive plates MDF, strapped inside, and the base plate, fixed by aluminum stands, has a thickness of 30 mm,...
Subwoofer Magnat Omega 300

This is one of the four subwoofers of Omega series. A dumb black body creates a strong impression. A huge woofer and bass-reflex port are placed on the lower panel and work to the floor - downfire. The "300th" is installed on four powerful cylindrical supports, in which thread bushes are pressed for...
Subwoofer Magnat Quantum 731A

German brand Magnat presented model 731A, one of the most overall in our test. Massive housing actuated from thick MDF sheets and pulled inside the ribs, the thickness of the front panel is 45 mm. 12 inch paper cone driver is mounted on the lower plane, and radiates onto the base plate, optimally bass...
Subwoofer MartinLogan BalancedForce 212

Move this colossus alone is very problematic - weighs new bass machine MartinLogan more than 60 kgs! But it is notable not only weight and dimensions. Of opposite LF drivers, plenty of choice of connections and adjustments, plus the possibility to download the finished filter presets for specific satellites...
Subwoofer MartinLogan Dynamo 300

Dynamo 300 is a compact subwoofer from Dynamo family and designed for the work in rooms of medium and small size. This model is almost a perfect cube with graceful legs-supports, providing necessary perspective for effective work of the emitter, directing down. Polypropylene 8-inch diffuser works in...
Subwoofer MartinLogan Grotto i

The closed-type body with unusual layout contains a 10-inch driver, the diffuser of which is made of lightweight aluminum alloy. Having small weight it differs by the highest rigidity that guarantees a minimum of distortions at any volume level. Amplification section of MartinLogan Grotto subwoofer literally...
Subwoofer Mirage LF-150

LF-150 is the senior subwoofer toward to a new series, consisting of only two low-frequency devices (LF-100, LF-150). The flagship has AB-class amplifier, which is able to give short-term power of 600W - a fourfold reserve for any kind of troubles. Operational controls - level, band and phase inverter...
Subwoofer Mirage MM-6

While unpacking the sub I thought that we have already tested it - its appearance looked very familiar. It turned out that Mirage MM-6 has a twin brother - Energy ESW-M6. The fact is quite clear - both brands are owned by one holding company "KGC". Moreover, these models turned out to be absolutely...
Subwoofer Mirage MM-8

This sub is a cube with edge of 23 cm in length, which does not prevent it to be one of the most advanced in technical terms. It has three emitters, one of which is active and placed to the front panel, and two passive radiators are placed on side edges of the body. Such decision allowed to get the lower...
Subwoofer Mirage Prestige S10

The current top-end line of active subwoofers model named Mirage Prestige S10. And no wonder - the sparkling polished lacquered faces unit is able to stand out not only an attractive exterior, but very informative and filled their small volume. Model is based on a 10-inch low frequency driver with...
Subwoofer Mirage Prestige S8

Model Prestige S8 - the youngest in the line of active subwoofers. It uses 8-inch head with a diffuser made of composite fiberglass and firm suspension Ribbed Elliptical Surround. Reinforcement ribs on the convex part of the elastic rings increased linearly movable system in both directions, which can...
Subwoofer Mission 79AS

Before us is a top active subwoofer Mission of the senior line 79SE, which also includes speakers of the highest class. Transmitter operating in a closed design, located in the lower part of the body. 10-inch cone is stamped from aluminum alloy with the addition of ceramic particles (patented technology...
Subwoofer Mission M3as

Active subwoofer M3as - the only one in the lineup, so conceived as a universal "Thunderer", capable to pump any reasonable room area. On the underside of the very respectable volume (more than 35 liters) of black housing is a 250-millimeter dynamic head of its own design, and launched down a reflex...
Subwoofer Monitor Audio ASW100

ASW-100 is a compact and light subwoofer. There are a 250mm head and two bass-reflex ports on the back panel - quite a typical feature of Monitor Audio systems. Controls and terminals are closely grouped on the service panel. Linear inputs (no outputs), high-amplitude inputs and outputs with correction...
Subwoofer Monitor Audio BRW10

Relatively compact subwoofer BRW-10 belongs to the latest series of Bronze Reference, at first glance gives the impression of a rather modest in its capabilities bass machine. However, technical indicators, it in no way inferior competitors. Model is equipped with 10-inch driver with a diffuser from...
Subwoofer Monitor Audio BXW10

The BXW10 model represents the last generation of a budget line the Bronze. Unlike the previous versions this subwoofer is realized in closed acoustic design that improves accuracy of playback of low frequencies. The diffuser of a 10-inch head is made by the C-CAM patented technology used in almost all...
Subwoofer Monitor Audio Gold GXW15

Subwoofer Gold GXW15 belongs to the second line from the top speaker of the British company Monitor Audio, positioned just above the model Platinum PLW15. In both machines use dynamic head with a diffuser diameter of 15 inches, made of firm material C-CAM. Long stroke cone, its large diameter and a massive...
Subwoofer Monitor Audio MRW10

The active MRW10 subwoofer effectually combines the traditional design and the innovative technical decisions. The main piece of hardware is the 10-inch driver specially developed with the MMP (Metal Matrix Polymer) composite diffuser. During its production the polypropylene base is reinforced with thin...
Subwoofer Monitor Audio Radius 390

Active model 390 belongs to the newly updated and significantly expanded line of Radius. Hard case is almost perfect cube, on the side walls of which a pair of branded emitters. Diffuser 10-inch active driver is made on the proprietary C-CAM - a metal substrate is sprayed ceramic coating. Passive membrane...
Subwoofer Mordaunt-Short 907W

MS907W is an active subwoofer from the developing Declaration model range. Comparing Mordaunt-Short sub with Gale 3080W, you quickly come to the conclusion that the devices are almost identical - starting with speakers and an amplification part and finishing with instructions. There are the same "triple"...
Subwoofer Mordaunt-Short 909W

Senior subwoofer lineup Declaration - Mordaunt-Short 909W. His speaker with firm and powerful hemispherical membrane suspension specially developed for this model. Heaviest root body is mounted on a support, which should be free to screw down onto the bottom of the work phase inverter. High-amplitude...
Subwoofer Mordaunt-Short Aviano 7

Recently, Mordaunt-Short increasingly uses its acoustics metal diffusers, and subwoofers are no exception. In Aviano 7 is a 10-inch driver with a membrane made of anodized aluminum CPC (Continuous Profile Cone). It is extremely tough and light, resulting in low distortion and fast response. Bass reflex...
Subwoofer Morel PSW10

The unusual shape of the subwoofer, the cast of a plastic composite, caused not only by considerations of design, but also fully justified from an acoustic point of view - it turns out at least resonances and internal reflections. Here set brand 10-inch speaker with a flat membrane, ventilated basket...
Subwoofer Paradigm DSP-3100

This low-end model in the line is equipped with a Canadian manufacturer of DSP 10-inch head with a diffuser of corporate composite CAP (Carbon/Aramid-Fiber Composite). Fiberglass-reinforced carbon fiber, gives additional rigidity membrane. The driver is also interesting four-voice coil, a powerful...
Subwoofer Paradigm DSP-3200 v2

To say that the appearance of Paradigm DSP-3200 v.2 solid and credible, to say nothing. Cabinet in finishing the "black ash" is made from a special inert material such as MDF, eliminates unwanted resonances and vibrations, as well as promoting the development of clean and accurate bass. Grill with slotted...
Subwoofer Paradigm PDR-10 v.4

Is the fourth version of the popular active subwoofer PDR-10 of Paradigm is designed to support the authority of Canadian manufacturers in the segment of affordable but quality products. Body with slightly rounded side faces seem very massive and so solid. Immediately evident that we are not dealing...
Subwoofer Paradigm PS-1000

A huge Canadian sub PS-1000 has not only the record sizes and mass, but, perhaps, the most curious design. First of all, an acoustic design "bandpass" was used: internal volume of the body is divided into two compartments by a partition, where a 255mm driver is fixed; the bigger one among the compartments,...
Subwoofer Paradigm PS-1200

The Canadian PS-1000 left unforgettable impressions and it will be even more interesting to get acquainted with more powerful representative of the series - PS-1200. It is a little bit larger and almost 5 kg (11 lb) heavier. There is the same narrow-band design: driver is mounted inside the body on vertical...
Subwoofer Paradigm UltraCube 10

A small cube-shaped subwoofer is quite compact. The main 254-mm woofer is located on the bottom of the body. Its diffuser is made of polymer. A powerful metallic basket also serves as heat sink. AVS ventilation system also helps to get rid of excess heat. The sub has two passive 229-mm radiators, installed...
Subwoofer Paradigm Ultracube 12

12-inch head with the diffuser, made of mineralized polypropylene, two-layer sound coil and cast aluminum basket, which has ASV heat-removal system, plays the role of an active element. Passive emitters have an aluminum membrane with the diameter of 250 mm, which is mounted on a specially designed suspension....
Subwoofer Piega PS 1

PS1 refers to compact subwoofers designed for small rooms. The first that catches the eye is excellent build quality of the body, in which the main part is made of thick MDF plates and the upper panel and support are made of aluminum. A 22-cm driver with increased speed of diffuser, working in bass-reflex...
Subwoofer Piega TMicro Sub

In the catalog of the Swiss Piega TMicto Sub takes the place of compact model, which is perfect for small rooms. The body is made of aluminum alloy - practical and acoustically inert material. The volume, in which a 18-cm driver with movable MDS system (Maximum Displacement Suspension) works, is limited...
Subwoofer Pioneer S-51W

The history of the company "Pioneer" as "acoustic" brand accounts to almost 80 years and now in its lineup it has about a dozen of different subwoofers for home use. Among them S-51W is positioned as inexpensive, compact subwoofer for small rooms. The subwoofer is qualitatively covered with black vinyl...
Subwoofer Pioneer S-W250S

Subwoofer S-W250S is positioned in the top-end catalogs Pioneer as a product of class High End. Structurally solid (30 kg), the device is divided into two separate sections. In fact, "acoustic" part of a pair of 30-centimeter drivers arranged on opposite walls of the housing - front active and passive...
Subwoofer Polk Audio DSW microPRO 1000

In the compact model DSW MicroPRO 1000 also implemented the scheme with an additional passive radiator. As the main driving force here used an 8-inch head with firm suspension, which is located on the front wall of thick MDF. Flat square-shaped passive radiator (200 x 200 mm) is directed downward, allowing...
Subwoofer Polk Audio DSW microPRO 3000

Polk Audio DSW microPRO 3000 differs from the younger one, DSW microPRO 1000, by size of the emitters. In our case there are two emitters: a 10-inch driver is put on the front panel and an additional passive membrane of the same caliber is located in the bottom part of the body. Such a cunning arrangement...
Subwoofer Polk Audio DSW PRO 440wi

"Wi" index model means that the subwoofer can operate in a wireless mode, which we have used to include it via an optional Wi-Fi-whale PSWK-1. But there are other tricks. For example, initially 8-inch head radiates into the floor, but after putting the legs on the other wall of the housing, you can send...
Subwoofer Polk Audio DSW Pro 550

Polk Audio DSW Pro 550 has large sizes and high power. LF-driver and slotted port of the bass-reflex are directed to floor and thick legs, turning into spikes with a subtle movement of the hand, provide a necessary distance. The woofer has a 254-mm polypropylene diffuser. Its construction is optimized...
Subwoofer Polk Audio PSW1000

The model PSW1000 is made in very massive case of bass-reflex type (by the branded Power Port technology) with the system of internal struts and side panels with the thickness of 4.5 cm. Two 10-inch own-produced drivers with polymer membranes made by Dynamic Balance principle are installed on them. The...
Subwoofer Polk Audio PSW12 Mark II

Model PSW12 participated in our tests, but since then has been more than a year, and entered the market an updated version of the index c MkII. During this time, the market for such technology seriously compacted, increased competition, new brands in Russia. First reincarnation subwoofer us quite liking,...
Subwoofer Polk Audio PSW125

PSW125 subwoofer differs by big sizes of the body and 12-inch caliber of LF-head. It is designed by the method of advanced computer simulation and has Dynamic Balance diffuser with composite structure. To increase the impact on the lowest frequencies, the bass reflex port is directed down (Floor Coupled...
Subwoofer PSB Speakers SubSeries 500

A pair of air ports in this enormous Subseries 500 is placed at the bottom of the body. For their effective work the sub relies on two reliable supports, which also isolate the device from floor surface. High strength diffuser of 12-inch head is woven from fiberglass - light and material with necessary...
Subwoofer PSB Speakers SubSonic 5i

One of the most affordable subwoofers this Canadian brand equipped with 10-inch head with polypropylene cone. It is provided with a solid magnetic voice coil system and the enlarged diameter (38 mm) with an effective emissivity. Head emits frontally, and helps her in this powerful amplifier, Class H,...
Subwoofer PSB Speakers Subsonic 6i

Two frontal bass-reflex ports of impressive diameter as if inkle that everything with bass in Subsonic 6i will be in full order. And it seems to be true - 12-inch head with polypropylene diffuser on soft elliptical suspension is hidden under the cloth grill. It is equipped with powerful magnetic system...
Subwoofer PSB Subsonic 8

The feature of PSB Subsonic 8 subwoofer is the use of two 250 mm woofers in the closed-typed body. The diffusers are made of polypropylene. A large port of the bass-reflex is placed on the front wall, under the speaker. Bash amplifier of H class is designed for 325W of continuous power and 800W in impulse...
Subwoofer REL T-ZERO

In due time the British REL literally shocked the market by ultra-compact Quake subwoofer - it was considered before that a true bass machine simply must have big sizes. Apparently, wanting to repeat this huge success, the company included a miniature T-ZERO in its assortment. Its sizes are very modest...
Subwoofer REL T2

REL T2 subwoofer is a small-sized cube, being put on very unusual metallic frames-legs, fixed along the perimeter of side walls. High-strength 254-mm woofer and passive radiator with big speed (ULT) are installed on the front and lower walls. Continious power of the built-in amplifier of AB class is...
Subwoofer REL T5

REL is one of the sector-specific companies, which deals only with subwoofers. Engineering concept followed by the developers supposes that the main speaker system will be full-sized and it will be necessary to add only the lowest frequencies. The woofer of T5 has the diameter of 200 mm and directed...
Subwoofer REL T7

Visually REL T7 spreads positive, especially if it is finished with white grand piano lacquer. "Cube" looks irresistibly. The front panel is closed by grill with a strained acoustic white fabric, in the upper side of which there is an aluminum nameplate with the company's logo. The body is traditionally...
Subwoofer REL T9

A small but weighty body has the form of cube, rests on small legs and is finished by piano lacquer (black or white is available). To achieve a maximally deep bass in the limited volume the popular scheme with passive radiator is used here. The tandem of 10-inch emitters allowed reducing the border of...
Subwoofer Revel Concerta B12

The American company Revel included in the world's largest audiokontsern Harman International, and the brand itself has been allocated for the production of high-end acoustics. I note that she confidently took the proper niche market. Incredibly heavy (29 kg net weight) with very compact dimensions,...
Subwoofer Sony SA-W2500

An active SA-W2500 subwoofer can be referred to the products of initial level, if you, surely, focus only on its price. And although in the manufacturer's arsenal there are more discerning subs for demanding listener, this model has all you need to provide high-quality low-frequency support in a small...
Subwoofer Sunfire Dominator D-10

Interestingly, having a considerable power (1000 W) and small sizes Sunfire Dominator D-10 sub doesn't have radiator. A 254-mm diffuser due to wide and long-stroke suspension allows moving large volumes of air. Three adjustable handles allow you to set frequency cut of crossover (30-100 Hz), phase (0-180?)...
Subwoofer Sunfire HRS-10

HRS-10 is a heavy subwoofer and looks impressive but doesn't grow out of 30 cm. Bevels on top edges and a big 10-inch driver with enhanced and stiff suspension give it monumentality. Such "impregnable" piston speakers, specially designed for small closed volumes, are the main feature of almost all developments...
Subwoofer Sunfire True

The True Subwoofer from Sunfire is the latest example of the unconventional audio equipment designs (and nomenclature) of Bob Carver. As its name implies, the latest Sunfire product is designed to extend the deep-bass coverage of a music or home-theater system all the way down to the limits of human...
Subwoofer Sunfire TS-EQ10

It is not like the competition in everything, starting with the very modest size of the shell with a rather impressive weight and ending with a complete system with auto-calibration measurement microphone. But the main thing - the manufacturer claims that at such a scale that kid on the coveted 20 Hz...
Subwoofer Tangent EVO E8

Evo E8 sub literally shines by the piano lacquer finish. Such coating gives a seemingly simple cubic form, albeit with slightly rounded edges, a special charm, so the lovers of elegant things must fully appreciate this style. As for the rest the subwoofer quite corresponds to beliefs about inexpensive...
Subwoofer Tannoy TS12

The famous Scottish company "Tannoy" has only one line of subwoofers in its arsenal. All three models with TS index have the "closed box" design and lower location of the dynamic head. They differ by the caliber of heads, power of the amp and are designed to sound rooms of various sizes. The eldest of...
Subwoofer Tannoy TS8

Tannoy TS8 is a small sized cube, covered with a soft on the touch matte material. Speaker has the diffuser's diameter of 200 mm and is directed to floor. Sound loading is closed that is very surprising and pleasant. What is interesting, there are XLR-connectors on the back wall, also a switchable high...
Subwoofer Triad Bronze OmniSub

The model developed by U.S. experts, designed for an average size room and was conceived as a bass machine universal application. It is equipped with a 10-inch head with a diffuser of pressed pulp and elastic rubber surround. Acoustic design - sealed box. There is also preferred hybrid amplifier technology...
Subwoofer Ultimate PSW-1000

Appearance PSW-1000 does not hide his membership in the budget price range, it's more likely to be regarded as a virtue (all the money - in the case). 10" woofer clearly Danish origin. Inside - a 150-watt amplifier. Rather light almost root sub set to high conical bearings, silver plastic which blends...
Subwoofer Velodyne CHT-10Q

Model CHT-10Q from a reputable American company Velodyne subwoofer literally crammed with modern digital technologies. It runs the powerful DSP - pre-processes the information and generates four preset sound (of which below). Moreover, it is allowed to realize unprecedented in subwoofers economy autocalibration...
Subwoofer Velodyne CHT-10RS

In a series of CHT presented four active woofers, CHT-10RS - second from the bottom model. Subwoofer emits a 200-mm speaker, bottom front slit arranged bass reflex port. A very positive difference in this device from its competitors in the test - the presence of a large number of remote and useful adjustments. ...
Subwoofer Velodyne CHT-12

Vented slotted port on the front - the constant sign Velodyne. CHT-12 is included in the original series of Classic Home Theatre. Cool design! Hopefully looks speaker with carbon fiber reinforced (for rigidity at high amplitudes) paper cone, voice coil and a four powerful magnet - almost half of the...
Subwoofer Velodyne CHT-15Q

The older model of the popular series of CHT-Q is equipped with a record caliber 15-inch (380 mm) head of firm development. Driver has a frontal location and works in bass-reflex design with slit-type port. Built-in digital amplifier endowed with real hard power - 1.5 kW. For correction and sound...
Subwoofer Velodyne MicroVee

Velodyne subwoofers always differ by non-standard technical solutions and advanced functionality. This also refers to even such a baby like MicroVee. Its body is made of MDF, not of aluminum profile, and has a ribbed anodized surface. Fabric grills on the left and right sides hides 17-cm passive radiators....
Subwoofer Velodyne VX-10II

Cube-shaped building is equipped with 250-mm speaker, which is located on the front panel. Bass reflex, like all organs switching/control located on the rear panel. The device allows you to adjust the cutoff frequency of the LPF, a discrete phase change. There are stereo line and high-amplitude input/output...
Subwoofer Wharfedale Diamond 10 SX-Sub

The tenth generation of Diamond series includes three active subwoofers, having difference in both caliber and functionality. 10SX-Sub has an 8-inch branded driver, working in bass-reflex design (port is directed backwards). The head itself "blows to the floor", so the character of sound can depend in...
Subwoofer Wharfedale PowerCube 10+

Quite compact "cube" PowerCube 10 + is not the youngest in the eponymous line machine, the model has more modest dimensions. Our ward has a proprietary 10-inch head with a powerful magnet system, which is already familiar to Wharfedale works "in the floor". This principle has long been used by many manufacturers...
Subwoofer Wharfedale SPC-12

This model is the eldest of three in the series and SPC, as you can guess, is equipped with 12-inch woofers. Own development company with a diffuser made of composite material and an increased stroke suspension gives certain advantages when playing deep bass. The cabinet, assembled from massive panels...
Subwoofer Wharfedale SW380

Built-in amplifier - not popular nowadays pulse, and the traditional, 600-watt, working in class AB. It is equipped with a special microprocessor to which is assigned as a function of control precision stroke diffuser using an acceleration sensor. Do not let us down and the body - it has carefully calculated...
Subwoofer Wharfedale UPC-10

Subwoofer Wharfedale UPC-10 is built on a "push-pull", which are used to implement two branded 10-inch drivers. They are located on the front and rear panels and effectively compensate for the vibration of each other. Thanks to a large total membrane area managed to get an impressive part of the volume...
Subwoofer Wharfedale UPC-6

Wharfedale UPC-6 stands out not only rich equipment and a magnificent finish, but the original design. It uses a push-pull configuration (usually found in very expensive technology), which involved a pair of 6-inch heads. This solution not only enhances the bass range, but also due to the mutual damping...
Subwoofer Yamaha NS-SW500

Externally body NS-SW500 resembles a truncated pyramid, one of the side faces which imposed reflex port. At the head 25-inch diffuser made by proprietary Yamaha. It is based on the pulp, which is to provide additional rigidity carbon fiber reinforced and wood fiber. Driver powered by built-in analog...
Subwoofer Yamaha NS-SW700

The cabinet is shaped like a truncated pyramid, the top of which are placed controls, including key and Standby. At the base set of 25-inch driver working at a special lens (Technology QD-Bass). Two low-noise vented port located on the side walls of the housing. Amplifying part is very solid - firm...
Subwoofer Yamaha YST-RSW300

Massive housing includes a powerful digital amplifier peak power of 270 W, loaded on 25-inch driver with a long stroke. There is a magnetic shielding. Several unconventionally located reflex port with a rounded socket - on the right side of the housing. On the rear panel there is a gentlemen's set all...
Subwoofer Yamaha YST-SW205

Advanced YST series of Yamaha contains nine (!) models of subwoofers, among which SW205 takes the middle position. YST abbreviation (Yamaha Servo Technology) means the use of feedback systems in the amplifier, radically increasing the damping factor. Advanced YST is its modified variant, allowing to...
Subwoofer Yamaha YST-SW215

YST-SW215 is a small subwoofer with a recognizable shape of body. It is due to the use of the branded QD-Bass technology, the main point of which is the use of pyramidal diffuser for proportional distribution of sound waves. In YST-SW215 such system works with a 20-cm speaker, radiating down. The bass-reflex...
Subwoofer Yamaha YST-SW320

An active subwoofer with traditionally difficult for Yamaha abbreviation - YST-SW320 belongs to Digital Pro series. The first part in the name stands as Yamaha Servo Technology - this is the special control system for parameters of LF head by spanning the amplifier with feedback through voltage and current....